Product Description

Glazing Spline profiles are extruded 70 durometer dense EPDM wedge profiles designed for use in compression glazing systems with Tremco POLYshimTM II Glazing Tapes.

Metal Requirements

Glazing Spline profiles require a .090” X .062” (2.29mm X 1.58mm) metal nib for proper engagement.


Packaging 

Glazing Spline profiles are ordered and identified by their finished face clearance and are packaged as follows: 

Availability 

Immediately available from your local Tremco Field Representative, Tremco Distributor or Tremco Warehouse. 

Special Requirements 

A mock-up is recommended by Tremco to verify acceptable mating between both the Glazing Spline and the Metal Nib.