Novalink 35

Data Sheet

Data Sheet

Overview

Overview


NovaLink 35 is a moisture curing, polyether, elastomeric joint sealant designed for application in damp, dry or cold climates. NovaLink 35 is solvent free and contains no isocyanates. NovaLink 35 will not shrink upon curing, will not discolor when exposed to UV light, and can
not “outgas” or bubble on damp surfaces as urethane sealants often do. NovaLink 35 has excellent adhesion to most construction materials and resilient elastomeric properties. NovaLink 35 is capable of joint movement in excess of 35% compression and extension. Because
it cures in wet or dry climate conditions and at low temperatures 32°F (0°C), NovaLink 35 can be used effectively in many difficult construction site conditions.

Features:

  • Solvent free, 100% solids will not shrink
  • 40 minute skin over
  • No outgassing on damp surfaces
  • Color stability, will not suntan
  • Paintable within 24 hours (See limitations)
  • +/- 35% joint movement

Specifications

Specifications


Novalink 35 meets or exceeds the requirements of the following specifications:

  • ASTM C920, Type S, Grade NS, Class 35, Uses NT, T2, M, G, A & O
  • Federal Specification TT-S-00230-C Type II, Class B
  • Corps of Engineers CRD-C-541, Type II, Class B
  • Canadian Standards Board CAN 19, 13-M82
  • SWR Institute Validated (Sealant Waterproofing and Restoration)
  • AAMA 802.3-08 Type II, AAMA 803.3-08 Type I, and AAMA 805.2-08 Group C
To top