Duralink 50

Data Sheet

Data Sheet

Overview

Overview


DuraLink 50 is an extremely elastic moisture curing sealant designed for use in cementitious siding, metal architecture, curtain wall construction and joints subject to movement. DuraLink 50’s adhesion to difficult surfaces permits its use on anodized metal and coatings such as Kynar 500® PVDF. DuraLink 50 will not stain absorbent stone substrates like limestone or marble. DuraLink 50’s unique polyether chemistry eliminates out-gassing on green concrete and protects against “sun tanning” or discoloration when exposed to ultraviolet light.

Features:

  • Bonds to Kynar 500® PVDF coated metal
  • Solvent free, 100% solids will not shrink
  • Non-slump, applies vertically and overhead
  • 40 minute skin over
  • No outgassing on damp surfaces
  • Available is a wide range of roofing & siding colors
  • Color stability, will not suntan
  • Paintable within 24 hours (See limitations)
  • +/- 50% joint movement

Specifications

Specifications


Duralink 50 meets or exceeds the requirements of the following specifications:

  • ASTM C920, Type S, Grade NS, Class 50, Uses NT, T2, M, G, A & O
  • Federal Specification TT-S-00230-C Type II, Class A
  • Corps of Engineers CRD-C-541, Type II, Class A
  • Canadian Standards Board CAN 19, 13-M82
  • SWR Institute Validated (Sealant Waterproofing and Restoration)
  • AAMA 802.3-08 Type II, AAMA 803.3-08 Type I, and AAMA 805.2-08 Group C
To top