TREMprime Non-Porous Primer

Usage: Non-porous surfaces, urethane sealants and acrylic coatings. A low-VOC, water-based, quick-drying, one-part primer. TREMprime Non-Porous Primer is not a film-forming primer. It is used as an adhesion promoter for urethane sealants and acrylic coatings on non-porous surfaces such as metals and plastics.

Apply with a clean cloth. Remove all excess primer from cloth to ensure a very thin layer is applied.

Dry time is 15 min at 70 oF (21 ̊C). Primer must be

  • completely dry and produce a tacky surface before applying sealant or coating.

  • Urethane sealants and acrylic coatings can be applied up to 8 hr after primer has been applied. After 8 hr, the
    surface must be cleaned with a Tremco approved solvent and reprimed with TREMprime Non-Porous Primer.

  •  Coverage Rate: 1,400 to 1,800 ft2/gal