MasterSeal P 255—a two-component polyurethane-based adhesive primer used in the Masterseal 2500 Traffic System.

MIXING AND APPLICATION

PRIMER (MasterSeal P 255)

  1. Before mixing, precondition both components to a temperature of approximately 70° F (21° C). 2.Add entire contents of Part B to Part A. Mix both components with a slow-speed drill for a minimum of 3 minutes. Scrape down sides and bottom of mixing vessel, then mix again for 2 minutes. Keep the mixing paddle submerged during mixing to avoid adding air into the mixture.

  2. Apply with paint roller or squeegee at a rate of 250–400 ft2/gal or approximately 4–6 wet mils.

  3. Apply primer only to those areas that will be coated within 12 hours with MasterSeal M 265. 

VOC Content

  • MasterSeal P 255 Part A: 10 g/L less water and exempt solvents, when components are mixed 

  • MasterSeal P 255 Part B: 10 g/L less water and exempt solvents, when components are mixed